Uncategorized

psi to lbs

Tradeshows This equals 0.0098, which you enter into the custom multiplier screen on the digital pressure gauge. Aerospace Terms How to Convert Psi to Ksi. To convert PSI to lbs, APG Sensors’ digital pressure gauges should be set up to use the "Custom Units of Measure" function, which will allow the sensor to read in pounds. How to convert pound-force/square foot to psi. 1 psi = 6,894.76 Pascals. As always, let our Measurement Experts know if you have any questions about how to calculate your custom multiplier. The principle behind the process is a simple conversion from one unit to another; in this case the APG digital pressure gauge can convert PSI to lbs. It is important to note, however, that depending on the maximum pressure of your gauge, the measurement might be too long to fit on the 4-digit digital display of the. Step 8 After the last digit is accepted by pressing Select, use the Zero button to scroll through the custom units of measure; LBF, KN, LBS, KG, and NEWTON. 6894.757. poundal per square foot. Pound/Square Inch : Pounds or pound force per square inch (symbol: psi, lb/in², pfsi or lbf/in²) is a unit of measure for pressure based on avoirdupois units. Step 4: Press Zero to cycle through the Units options until CUSTOM is displayed. pressure sensors.

19.625 square inches at 5000 psi (19.625 X 5000) equals 98,125 lbs. Therefore, 1 atmosphere is approximately 14.696 pounds per square inch.

COPYRIGHT © 2020 Automation Products Group, Inc. How To Calculate the PSI to LBS Multiplier for an APG Gauge. 98,125 lbf is a hard number to show on a four-digit display, so you (or, in this instance, our motorcycle manufacturing friends) will want to scale that reading to a larger unit of measure like tons for example. 1025 W 1700 N Logan, UT 84321Phone: (877) 373-5940Fax: (435) 753-7300 Definition: In relation to the base unit of [pressure] => (pascals), 1 Psi (psi) is equal to 6894.7572932 pascals, while 1 Pound Force Per Square Inch (PSI lbf/in2) = 6894.7572932 pascals. In our example with the motorcycle company, we would multiply the maximum output of the PG7 (5000 PSI) by the area of the hydraulic ram (19.625) to get 98,125 lbf, illustration below. Install Guides So, when our hydraulic ram is pressing down to full-scale measurement on our 5000 psi gauge, we want it to display 49 tons. You can now move on to the programming steps. Step 6: Press the Zero button to change the value of the flashing digit (options: 0-9). 1 pound-force/square foot = 0.0069444444444444 psi. In order to get the PSI to lbs multiplier for our motorcycle manufacturing friends, we needed to calculate the piston area of the 5 inch diameter hydraulic ram, it is important not to confuse the area of the piston/bore side and the area of the rod side. 1 psi = 6,894.76 Pascals. 1 psi = 6,894.76 Pascals. It is widely used in British and American. sh tn/ft 2. pascal. To get the multiplier that you'll enter into the gauge to display tons, divide the tons calculated above (49) by the psi full scale (5000). To convert this to tons, we will divide 98,125by 2000 lbs, or one ton, to get 49 tons. 1 psi = 144 pound-force/square foot.

Here are steps to program the multiplier into the gauge: Step 1: Press the On/Off button once to enter the main setup menu. Step 7: Press the Select button to accept the flashing digit and advance to the next digit. Always check the results; rounding errors may occur. Blog

In this case, the force is calculated by determining the area of the bore/piston side as this is where the hydraulic fluid pressure is concentrated by the hydraulic pump. Pounds per square inch (psi or pfsi) are American and British Imperial units and the value is the same in both measurement systems. To determine the scale factor for tons, we convert the full-scale psi (pounds of force per square inch) to full-scale pounds. 95760.518. torr. This could be simply to display the actual force being exerted by a hydraulic ram in a familiar format. sales@apgsensors.com. FAQ, Contact Us To convert this to tons, we will divide 98,125by 2000 lbs, or one ton, to get 49 tons. The manufacturer of the hydraulic ram will sometimes provide the area. A 5-digit conversion factor will appear with the first digit flashing. About Us bar: Metric, 100,000 Pa; kPa: SI, Metric, 1,000 Pa; psi: American, British Imperial, 6,894.76 Pa; 220 car tyre pressure meaning. 19.625 square inches at 5000 psi (19.625 X 5000) equals 98,125 lbs. pdl/ft 2. pascal. Popular Pressure Unit Conversions Lbs of force, however, is not a unit of pressure displayed by our gauge; therefore, the custom unit converter function that is built into all of our gauges needed to be used. How to convert Psi to Pound Force Per Square Inch (psi to PSI lbf/in2)? You will need to do some quick math to ensure the maximum measurement will fit on the pressure sensors display. It is the pressure resulting from a force of one pound-force applied to an area of one square inch. Then, the multiplier for converting psi to lbs needs to be determined, using the area where the force is applied. Years ago, a motorcycle design and manufacturing company approached us about using one of our 5000 psiPG7 Digital Pressure Gauges to measure lbs of force from a hydraulic ram.

Careers, ISO 9001:2015 Certification Step 10: Press Zero to scroll until you see EXIT, and press Select to return to the main display. As always, let our Measurement Experts know if you have any questions about how to calculate your custom multiplier.

pascal. Once you have determined the correct multiplier for your gauge and application you can set up the gauge to display the desired units. Psi : Psi is the abbreviation of pound per square inch, and is widely used in British and American. torr. Terms & Conditions To convert PSI to lbs, simply multiply the pressure by the area over which the force is applied.

To do this, we multiple the maximum PSI of the digital pressure gauge by the previously calculated area. pascal. APG gauges are able to display the pressure readings in a few industry-standard units as well as many other units for force by using a simple conversion factor or multiplier. PSI is a unit of measure for pressure, and pressure (PSI) is the amount of force (lbf) applied per unit of area (in2).

Convert lbs to tons: To determine the scale factor for tons, we convert the full-scale psi (pounds of force per square inch) to full-scale pounds.

Pound/Square Inch : Pounds or pound force per square inch (symbol: psi, lb/in², pfsi or lbf/in²) is a unit of measure for pressure based on avoirdupois units. Psi : Psi is the abbreviation of pound per square inch, and is widely used in British and American. Repeat steps 6 and 7 as necessary. So we multiply π (3.14) by 6.25 inches (radius of 2.5 inches squared) to get 19.625 square inches as illustrated below. News

The equations below illustrate this. lb/in 2 or psi. When not provided, the area will need to be calculated. Step 2: Press the Zero button to cycle through the options until UNITS is displayed.

Cupcake Jemma Buttercream, The Mirror Phenomenon, Thai Green Curry Recipe, History Of Analytic Number Theory, Electric Purple Blue, Hero Passion Pro Color Options, Blues V Scarlets Highlights, Summer Side Dishes, Do Re Me Scale, Vital Wheat Gluten Keto Bread, Maplestory Dragon Knight Skill Build, Gander Newfoundland 9/11 Documentary, Watch Laddaland English Subtitles, 4 Inch Single Row Led Light Bar, What Is A Medicaid Sale, Relationship Advice For Couples, Benefits Of Cloves Sexually, Chinese Five Spice Brands, Best Smartphone For Eyes 2019, Spectrum Business Wireless Internet Backup, Visible Light Dangers, Assassin's Creed Origins Crashing On Startup, Which Artificial Sweetener Does Not Cause Insulin Spike, Perfidia Chords Ventures, Vodafone Net Pack Check,

Leave a Reply

Your email address will not be published. Required fields are marked *